Racetech Racing Seat Mounting Set

This set does require some fabrication. Once the cross members are cut to suit, you must drill holes and weld in the inserts, weld the endplates. You will need to drill holes in the bodyshell lower rail and tunnel (larger than the nut outer diameter) then weld the counter plates to your bodyshell.

Kit Contents:

• 2x Steel transverse cross members – 608 x 38 x 38mm, 2.5mm thick
• 4x Steel end plates – 88 x 46mm, 3mm thick
• 4x Steel counterplates with welded nuts – 106 x 60mm, 2mm thick
• 4x M8 threaded bosses – 37 x 16mm
• 8x M8 x 20mm (12.9 grade) cap screws with flat and spring washers